GENERAL

The Forcefield Protective Sweatband ™ is designed for those participating in recreational and other activities where there is a risk of a fall or impact to the head and a helmet is not standard equipment. Worn to reduce the severity of impacts to the head. The headbands are proven to significantly absorb and dissipate the force associated with an impact.

Placement

Place the Forcefield Protective Sweatband ™ around the circumference of your head across your forehead just like a sweatband and make sure that it stays in that position for optimum protection. Wear anytime there is a risk of impact to the head.

You may wear the headgear under a hat, hood, cap, wrap, bandana, toque or earmuffs.

Forcefield Protective Headband™: BEFORE FIRST USE Bend long sections of polymer gently to curve slightly. Wrap around and velcro close securely. A minimum of 2.5cm of velcro must overlap for effective performance. Once secured, there is enough “give” to pull off and on without detaching the velcro. If the velcro catches the hair upon removal, trim the supplied cover strip and press onto the exposed velcro. Wear anytime there is a risk of impact to the head.
Washing, Disinfecting and General Care

The Forcefield Protective Sweatband ™ can be cleaned with ordinary soap and water.

Hand wash only – Do not machine wash. Do not bleach.

After washing, allow the headgear to air-dry away from direct sunlight.

DO NOT PLACE THE HEADBAND IN AN ELECTRIC DRYER OR MICROWAVE OR OVEN. THE INTEGRITY OF THE PRODUCT WILL BE COMPROMISED.

Storage

The Forcefield Protective Sweatband ™ should be stored at temperatures between 5 – 26 degrees Celsius (40-80 degrees Fahrenheit).

Failure to follow these instructions may result in serious and/or permanent injuries.